S50
S50C
S50R
Tutorials for S50,S50C,S50R
App Connection
Scan the QR code or search for "Smart Life" in your app store to download the app. After installation, open the app, log in and select your region, and proceed to the main menu.
On your device, enter the Setting menu and press the Measure button to enable the LINK function.
Return to the Smart Life app, tap the plus icon in the upper right corner, select "Add Device", then choose "Continue" and allow the app to access all permissions including location, local network, Bluetooth, and home data. Your phone will automatically detect the device and tap to complete the connection.
Once successfully paired, measurement results will sync automatically to your phone.
Units
Enter setting menu, select Units. Press the Measure button to switch between six units. Press the Power button to save and exit.
Auto Rotate
Enter setting menu, select Auto Rotate. Press the Measure button to enable or disable the function. Press the Power button to save and exit.
Timer
Enter setting menu, select Timer. Press the Measure button to choose 3 seconds or 5 seconds. Press the Power button to save and exit.
Background
Enter setting menu, select Background. Press the Measure button to switch between Black and White background. Press the Power button to save and exit.
View More
View Less
MILESEEY TOOLS App
1. Download the app
Search “MILESEEY TOOLS App” in the App Store or Google Play to download and install the app.
2. Create your account and connect S50C
Open the app and sign up with your email address. Turn on Bluetooth on both your phone and S50C, then tap the Bluetooth icon on the Project Plan page or go to Account > My Device to pair and connect the device.
3. Create your first project
Tap “Create New Project”, edit the project name(on the top right corner), and fill out Project Detail.
4. Add a floor and create a room
In the project, tap "+ " in the Hand-Drawing section to add a floor. Then tap "+ Insert " to select Room to draw wall by wall, or select Photo to upload or take a picture.
5. Measure and sync data
Select a room, tap a wall, then tap the corresponding measurement value. Start your measurement on S50C, and the reading will transfer instantly. Repeat for each wall. You can also add "+" a form in the Form section and sync directly into your phone.
magicplan App
1. Download the app
Scan the QR code below, or search "magicplan" in your App Store or Google Play to download and install the magicplan app on your phone.
2. Create your account
Open the app and sign up with your email address. It takes about 60 seconds. No credit card required to get started.
3.Create your first project
Tap "New Project," give it a name and address, then tap "Create". Your project is your job file: everything you capture lives here.
4. Add a floor and create a room
Inside your project, tap the "+" in the Floor Plans section to add a floor. Then tap "+ Insert" and choose "Room." You'll be asked how you want to draw it.
5. Choose how to draw your room
Room Scan (iOS Pro devices): auto-capture with LiDAR camera.
Square Room: drop a rectangle and adjust dimensions.
Free Form Room: draw any shape wall by wall.
Import & Draw: trace over an uploaded photo or sketch.
6. Connect your MILESEEY S50C for precise measurements
Turn on the S50C and enable "LINK" in the Setting menu. Enable Bluetooth on your phone. Open a room, tap a wall, then tap the blue measurement number. Select "Laser" in the pop-up, find the S50C under Nearby Devices, and tap Connect. Pull the trigger to measure. The reading transfers instantly. Repeat for each wall. Visit here for more tutorials and tips.
7. Watch the Getting Started video
New to magicplan? The 5-minute walkthrough video covers everything from room scanning to sharing your first report.
Unit
Enter setting menu, select Unit. Press the Left/Right button to switch between eight units. Press the Power button to save and exit.
Angle Unit
Enter setting menu, select Angle Unit. Press the Left/Right button to switch between two units. Press the Power button to save and exit.
Bluetooth
Enter setting menu, select Blutooth. Press the Measure button to turn it on or off. Press the Power button to save and exit.
View More
View Less
magicplan App Connection
1. Download the app
Scan the QR code below, or search "magicplan" in your App Store or Google Play to download and install the magicplan app on your phone.
2. Create your account
Open the app and sign up with your email address. It takes about 60 seconds. No credit card required to get started.
3.Create your first project
Tap "New Project," give it a name and address, then tap "Create". Your project is your job file: everything you capture lives here.
4. Add a floor and create a room
Inside your project, tap the "+" in the Floor Plans section to add a floor. Then tap "+ Insert" and choose "Room." You'll be asked how you want to draw it.
5. Choose how to draw your room
Room Scan (iOS Pro devices): auto-capture with LiDAR camera.
Square Room: drop a rectangle and adjust dimensions.
Free Form Room: draw any shape wall by wall.
Import & Draw: trace over an uploaded photo or sketch.
6. Connect your MILESEEY S50R for precise measurements
Turn on the S50R and enable "LINK" in the Setting menu. Enable Bluetooth on your phone. Open a room, tap a wall, then tap the blue measurement number. Select "Laser" in the pop-up, find the S50R under Nearby Devices, and tap Connect. Pull the trigger to measure. The reading transfers instantly. Repeat for each wall. Visit here for more tutorials and tips.
7. Watch the Getting Started video
New to magicplan? The 5-minute walkthrough video covers everything from room scanning to sharing your first report.
Units
Enter setting menu, select Units. Press the Measure button to switch between six units. Press the Power button to save and exit.
Auto Rotate
Enter setting menu, select Auto Rotate. Press the Measure button to enable or disable the function. Press the Power button to save and exit.
Timer
Enter setting menu, select Timer. Press the Measure button to choose 3 seconds or 5 seconds. Press the Power button to save and exit.
Background
Enter setting menu, select Background. Press the Measure button to switch between Black and White background. Press the Power button to save and exit.
View More
View Less
Single Length
Single Length mode helps to measure and check straight distance between any two points.
① Aim at the target point and press the Measure button.
Continuous
Continuous mode keeps measuring as you move, making it easier to find the exact position in rea time, and locate maximum or minimum values without repeated measuring.
① Aim at the target, then move the device steadily until the desired distance is obtained.
② Press the Measure button to measure target distance and end the meansrement.
It will automatically calculate and display the following data in order: Min, Max, Target Distance.
P2P
P2P Technology helps to measure distances between any two points without physically reaching them.
① Set the reference point to “Tripod” and calibrate the device by keeping it still for 6 seconds.
② Aim at the first target point and press the Measure button to get Side 1.
③ Aim at the other target point and press the Measure button to get Side 2.
⚠️ Please keep the tripod still during the entire measurement.
It will automatically calculate and display the following data in order: Angle α, Side 1, Side 2, Target Distance L.
Note: For best results, keep the measurement line horizontal when using this function.
Wall Area
Wall Area mode helps to calculate the total area of multiple walls or surfaces with the same height.
① Align with the height of the wall and press the Measure button (Record as H).
② Align with the length of the wall and press the Measure button (Record as L)
③ Align with the length of the other wall and press the Measure button (Record as L), and the total length of the two walls will be updated. (Record as ∑L)
It will automatically calculate and display the following data in order: Height H, Total Length of the two walls ∑L, Lenght L, Total Area.
Area
Area mode helps to calculate rectangular areas instantly, making it useful for walls, windows, and similar surfaces, with no manual math needed.
① Align with one side and press the Measure button to get Side 1.
② Align with the other side and press the Measure button to get Side 2.
It will automatically calculate and display the following data in order: Side 1, Side 2, Perimeter C, Area A.
View More
View Less
Single Length
Single Length mode helps to measure and check straight distance between any two points.
①Aim at the target point and press the Measure or Side Measure button.
Continuous
Continuous mode keeps
① Aim at the target, then move the device steadily until the desired distance is obtained.
② Press the Measure or Side Measure button to measure target distance and end the meansrement.
It will automatically calculate and display the following data in order: Min, Max, Target Distance.
P2P
P2P Technology helps to measure distances between any two points without physically reaching them.
① Set the reference point to “Tripod” and calibrate the device by keeping it still for 6 seconds.
② Aim at the first target point and press the Measure or Side Measure button to get Side 1.
③ Aim at the other target point and press the Measure or Side Measure button to get Side 2.
⚠️ Please keep the tripod still during the entire measurement.
It will automatically calculate and display the following data in order: Angle α, Side 1, Side 2, Target Distance L.
Note: For best results, keep the measurement line horizontal when using this function.
Wall Area
Wall Area mode helps to calculate the total area of multiple walls or surfaces with the same height.
① Align with the height of the wall and press the Measure or Side Measure button (Record as H).
② Align with the length of the wall and press the Measure or Side Measure button (Record as L)
③ Align with the length of the other wall and press the Measure button (Record as L), and the total length of the two walls will be updated. (Record as ∑L)
It will automatically calculate and display the following data in order: Height H, Total Length of the two walls ∑L, Lenght L, Total Area.
Area
Area mode helps to calculate rectangular areas instantly, making it useful for walls, windows, and similar surfaces, with no manual math needed.
① Align with one side and press the Measure or Side Measure button to get Side 1.
② Align with the other side and press the Measure or Side Measure button to get Side 2.
It will automatically calculate and display the following data in order: Side 1, Side 2, Perimeter C, Area A.
View More
View Less
Single Length
Single Length mode helps to measure and check straight distance between any two points.
① Aim at the target point and press the Measure button.
Continuous
Continuous mode keeps measuring as you move, making it easier to find the exact position in rea time, and locate maximum or minimum values without repeated measuring.
① Aim at the target, then move the device steadily until the desired distance is obtained.
② Press the Measure button to measure target distance and end the meansrement.
It will automatically calculate and display the following data in order: Min, Max, Target Distance.
P2P
P2P Technology helps to measure distances between any two points without physically reaching them.
① Set the reference point to “Tripod” and calibrate the device by keeping it still for 6 seconds.
② Aim at the first target point and press the Measure button to get Side 1.
③ Aim at the other target point and press the Measure button to get Side 2.
⚠️ Please keep the tripod still during the entire measurement.
It will automatically calculate and display the following data in order: Angle α, Side 1, Side 2, Target Distance L.
Note: For best results, keep the measurement line horizontal when using this function.
Wall Area
Wall Area mode helps to calculate the total area of multiple walls or surfaces with the same height.
① Align with the height of the wall and press the Measure button (Record as H).
② Align with the length of the wall and press the Measure button (Record as L)
③ Align with the length of the other wall and press the Measure button (Record as L), and the total length of the two walls will be updated. (Record as ∑L)
It will automatically calculate and display the following data in order: Height H, Total Length of the two walls ∑L, Lenght L, Total Area.
Area
Area mode helps to calculate rectangular areas instantly, making it useful for walls, windows, and similar surfaces, with no manual math needed.
① Align with one side and press the Measure button to get Side 1.
② Align with the other side and press the Measure button to get Side 2.
It will automatically calculate and display the following data in order: Side 1, Side 2, Perimeter C, Area A.
View More
View Less